BRTSys Products
Description
This is a BRTSYS product and will be billed under BRT Systems Pte Ltd./Bridgetek Pte Ltd.
BRT Systems Pte Ltd has Solutions including PanL Smart Living, PanL Room Manager, PanL Desk Manager, PanL Guest Room Management System, IoTPortal and LDSBus Sensors and Actuators. Below are the products you can purchase from Webshop.
For any queries on IDM2040-7A, please visit the link provided: https://brtchip.com/product/idm2040-7a/
LDSBus Quad T-Junction
The LDSBus Quad T-Junction connects LDSBus Devices (Sensors/Actuators) to the LDSBus. It serves as a data and power interface between the LDSBus host and the LDSBus devices.
LDSBus USB Adapter SET
The LDSBus USB Adapter is an integral tool of the LDSBus and issued with the LDSBus Configuration Utility and LDSBus Python SDK.
LDSBus 2CH Relay + iSENSE / 2CH Relay
LDSBus 2CH Relay + iSENSE incorporate 2 relay controllers that have high load current handling capacity of 16A. These relays can switch both AC and DC loads.
LDSBus IoTPortal Gateway (PSU Version)
The IoTPortal Gateway allows a wide variety of LDSBus protocol based LDSBus Devices (sensors/actuators) to communicate with BRTSys IoTPortal Cloud services without the need for a PC
LDSBus 4in1 Sensor (Flush)
The LDSBus 4-in-1 Sensor consists of 4 sensors in a compact low-profile design. Temperature, humidity, Passive Infra-Red (PIR) based motion detection and ambient light measurement sensors are incorporated in this multi-sensor device.
LDSBus Thermocouple Sensor Adapter
The LDSBus Thermocouple Sensor Adapter is designed to operate with any K-type thermocouple probe and provides temperature measurements ranging between -200oC to 1372oC with an accuracy of ±0.5oC.
LDSBus pH Sensor Adapter
The LDSBus pH Sensor Adapter is designed to work with pH probes to form a complete pH sensor. The adapter consists of a built-in BNC connector used to attach pH probes.
LDSBus EC Sensor
The LDSBus Electrical Conductivity (EC) Sensor Adapter is designed to work with EC probes to form a complete EC sensor.
LDSBus DO Sensor Adapter
The LDSBus Dissolved Oxygen (DO) Sensor Adapter is designed to work with an analog galvanic probe to form a complete DO sensor.
Document
Part Number | Document Type | File |
LDSBus Quad T-Junction LA010101A |
Datasheet Technical Note |
|
LDSBus USB Adapter Set LA021101A |
Datasheet | Download |
LDSBus 2CH Relay + iSENSE LC010101A |
Datasheet |
Download |
LDSBus 2CH Relay LC011101A |
Datasheet | Download |
LDSBus IoTPortal Gateway (PSU Version) LG011201A |
Datasheet | Download |
LDSBus Isolated IO Controller LC060101A |
Datasheet | Download |
LDSBus 4in1 (Flush) LS010101A |
Datasheet | Download |
LDSBus Thermocouple Sensor Adapter LS030101A |
Datasheet | Download |
LDSBus pH Sensor Adapter LS040101A |
Datasheet | Download |
LDSBus EC Sensor Adapter LS050101A |
Datasheet | Download |
LDSBus DO Sensor Adapter LS100101A |
Datasheet | Download |
LDSBus DIN Rail Mount Set LA120101A |